Compatibility
|
NVIDIA Jetson AGX Xavier
|
Networking
|
x Gigabit Ethernet (8p8c RJ-45)
1 Port from RGMII PHY Controller
1 Port from PCIe PHY Controller
|
Camera Inputs
|
6 x2 Lane MIPI CSI-2 or 4 x4 Lane MIPI CSI-2
All connected via high-density camera connector breakout. Same pinout
as development kit. Application specific camera add-on boards can be
used in con- junction with this interface (Up to 6x MIPI I-PEX, SerDes
Inputs: GMSL or FPD-Link III, HDMI Inputs)
|
USB
|
1x USB OTG (Micro-AB), 3x USB 3.1 Ports (Type-C)
|
Storage
|
1 x Micro SD/UFS Card Slot, 2x NVMe M.2 Key M Slots
|
UART
|
2x @ 3.3V levels UART0 and UART1
|
I2C/SPI
|
1x I2C Channel @ 3.3V IO
1x SPI Channel @ 3.3V IO
|
CAN
|
2 x CAN 2.0b Port
|
GPIO
|
4 bits of 3.3V (level shifted GPIO)
|
User Expansion
|
1 x M.2 Key E Slot with PCIe & USB (WiFi + BT modules)
|
Input Power
|
Wide Input 9-19V DC
(Positive Locking Molex Mini-Fit Jr Header)
|
Buttons
|
Power, Reset, Recovery
(Tactile Buttons as well as fine pitch pin header connector)
|
RTC Battery
|
3-pin Picoblade connector to accept CTI battery cable assembly
|
PCB/Electronics Mechanical Information
|
92mm x 105m
|
|
Compatibility with both Development and Production modules.
|
|
|